Correct HP selection depends on four variables: required flow rate (LPM), total head (metres from water surface to discharge point), water type, and available power source.
For the Cosmos CDW submersible range:
- 1.5–3 HP: 450–1,200 LPM at heads up to 30 metres — suitable for small construction sumps, shallow basement pits
- 5–10 HP: 1,500–3,000 LPM at 40–60 metres — medium tunnel and basement dewatering, drainage trenches
- 15–50 HP: 4,000–8,500 LPM or heads above 70 metres — large infrastructure sites, mines, highway cuttings
For slurry applications (CSL range, SG up to 2.1): Upsize by 30–50% versus clean water calculations to account for the specific gravity of the fluid.
For sewage (CSW range): Solid size (20–100 mm) determines pump selection as much as HP. A 50 HP CSW handles 33,000 LPM at 60 metres head.
For surface-mounted auto-prime (CAP range): Available in 2 HP to 1,550+ HP — primarily selected by flow rate and required suction lift from the sump.
Always measure actual site conditions before ordering: static water level, discharge pipe length, and elevation change from sump to discharge all affect head calculations. Contact Cosmos technical sales at +91 99333 22238 with site measurements for a precise recommendation.