iDEWA is the world's first AI-powered dewatering solution consultant, developed by Cosmos Pumps, that analyses site conditions and recommends the optimal dewatering pump configuration. Site engineers and EPC contractors enter project parameters — excavation depth, soil type, required flow rate, and discharge head — and iDEWA cross-references 10,000+ real-project duty points against the full Cosmos pump range to return a precise model recommendation with technical specifications in under 60 seconds.
iDEWA is free to use, requires no login, and is accessible directly from the Cosmos Pumps website. It is designed for construction site engineers, EPC project managers, dewatering rental contractors, and junior pump specifiers who may not have a senior hydraulics engineer on site.
iDEWA converts site parameters into a complete dewatering solution in three steps:
iDEWA also flags when a duty point sits near the edge of a pump's performance curve — an important safety check that prevents unreliable field operation due to cavitation or motor overloading.
iDEWA and CosmoSmart™ are Cosmos Pumps' two AI and IoT technologies that together cover the full project lifecycle — from initial pump selection through to long-term fleet monitoring.
Together, iDEWA and CosmoSmart deliver a closed-loop dewatering intelligence system: the right pump selected before mobilisation, continuously monitored after deployment — reducing both initial selection risk and in-service downtime.
How does iDEWA work?
iDEWA works in three steps. First, you enter your site parameters — excavation depth, required flow rate, total discharge head, soil type, and power source. Second, the AI engine cross-references your inputs against 10,000+ real-project duty points and identifies the most economical model whose published curve can reliably meet your duty point. Third, iDEWA returns a specific pump model recommendation with technical specifications, catalog data, and a troubleshooting guide — all in under 60 seconds.
Is iDEWA free to use?
Yes. iDEWA is completely free to use. There is no subscription, no login, and no registration required. It is available directly on the Cosmos Pumps website and accessible from any device — desktop, tablet, or mobile — 24 hours a day, 7 days a week, from any project site.
What data does iDEWA need to make a recommendation?
iDEWA requires four core site parameters: (1) excavation depth or sump depth in metres, (2) required flow rate in LPM or m³/hr, (3) total discharge head including static lift and friction losses in metres, and (4) the type of fluid being pumped — clean water, muddy/dirty water, sewage, or abrasive slurry. Optionally, you can specify your available power source (electric grid or diesel engine) to filter recommendations to electric submersible or diesel auto-prime models.
Can iDEWA be used for mine dewatering?
Yes. iDEWA covers the full Cosmos pump range including the CDW Ultra High Head submersible series (up to 200m head) and the CSL slurry pump series (27% hi-chrome, solids up to 70% by weight) — the primary products for open-cast and underground mine dewatering. When you enter your mine's sump depth, flow rate requirement, and fluid type, iDEWA will recommend the appropriate CDW-UH or CSL model with the specific duty point configuration.
What pump ranges does iDEWA cover?
iDEWA covers the complete Cosmos Pumps range: CDW submersible dewatering pumps (standard head, high head, ultra-high-head up to 200m), CNC non-clog submersible pumps (up to 70mm solids), CSW sewage submersible pumps (20–100mm solids, SG up to 1.7), CSL slurry submersible pumps (hi-chrome for abrasive/mining duty), CSP self-priming surface pumps, and CAP auto-prime diesel surface pumps (up to 1,550 HP, flow rates up to 74,483 LPM).
How accurate is iDEWA's pump recommendation?
iDEWA's recommendations are verified against published Cosmos pump performance curves. The AI applies the minimum-power selection rule, choosing the most economical pump whose real published curve can serve the requested duty point within a safe operating band. iDEWA also flags duty points near the edge of a pump's curve — a risk indicator for cavitation or motor overload that manual catalogue-based selection often misses.
Does iDEWA replace a pump engineer?
iDEWA is designed to support site teams without a senior pump engineer on call, not to replace qualified engineers on complex projects. For standard applications — construction site sumps, foundation dewatering, tunnel drives, flood control — iDEWA provides a reliable first-pass recommendation. For applications involving series relay pumping, extreme depth installations, or mission-critical safety requirements, the Cosmos engineering team recommends a supervised review before procurement.
Who developed iDEWA and when was it launched?
iDEWA was developed by Cosmos Pumps Pvt. Ltd., headquartered in Faridabad, Haryana, India. Cosmos Pumps is an ISO and CE-certified manufacturer of dewatering, sewage, and slurry pumps founded in 2013. iDEWA launched in 2026 as part of Cosmos Pumps' evolution as a technology-led dewatering brand, following the rollout of CosmoSmart IoT monitoring in 2024 and CosmoSmart 2.0 in 2025. iDEWA is the world's first AI-powered dewatering solution consultant specifically built for industrial dewatering pump selection.
