Drainage Pump — Industrial & Municipal Dewatering Solutions

    Home » Drainage Pump — Industrial & Municipal Dewatering Solutions

A drainage pump removes accumulated water from a site, sump, or flooded area and discharges it at distance or elevation. Cosmos drainage pumps cover submersible electric models (CDW series, 1.5–120 HP), diesel-engine auto-prime surface units (CAP series, up to 1,550+ HP), and self-priming surface pumps (CSP series, up to 30 HP), handling construction site dewatering, municipal stormwater management, flood control, and industrial drainage from a single manufacturer.

Types of drainage pumps

CDW submersible drainage pump

The CDW submersible drainage pump goes directly into the sump — no suction pipe, no priming. It handles dirty water with suspended solids up to 12 mm and operates fully submerged. CDW Standard covers 1.5–50 HP (flow to 8,500 LPM, head to 86.5 M); CDW High Head extends to 75 HP and 140 M for deep foundation pits and tunnel drainage; CDW Ultra High Head reaches 120 HP and 200 M for mine drainage and hydro-power civil works. All CDW variants run on grid power. Cosmos deploys 300+ submersible units per year on construction projects across India and 20+ export countries.

CAP auto-prime surface drainage pump

The CAP auto-prime surface drainage pump handles large-volume drainage where a submersible is not practical: flood control operations, open excavations with fluctuating water levels, and sites without grid power. The CAP draws water against a suction lift up to 9.8 m without manual priming and delivers flow rates up to 74,483 LPM (4,469 m³/h) at heads up to 169 M. KOEL, Eicher, Baudouin, and CAT engine options cover remote and off-grid drainage duty. The open impeller variant handles solids up to 75 mm — debris-laden floodwater without clogging.

CSP self-priming drainage pump

The CSP self-priming surface drainage pump handles light to medium drainage duty: foundation trench drainage, basement water removal, and chemical or ash-water drainage at construction and industrial sites. Rated to 30 HP, 4,500 LPM, and 28 M shut-off head, the CSP bridges the gap between CDW submersibles and the large-volume CAP series, and handles corrosive effluents that a standard submersible cannot.

Drainage pump selection

Pump typeDriveHP rangeFlow (max)Head (max)Best drainage applicationKey differentiator
CDW SubmersibleElectric1.5–120 HP8,500 LPM200 MConstruction sumps, tunnel pits, basementsOperates fully submerged; no suction line
CAP Auto-PrimeDiesel/ElectricUp to 1,550+ HP74,483 LPM169 MFlood control, municipal drainage, open excavationNo priming; runs dry without damage; portable
CSP Self-PrimingElectric/DieselUp to 30 HP4,500 LPM28 MFoundation trenches, chemical/ash drainageHandles sewage, ash, and chemical effluents

Selection rule: Use CDW for pit and sump drainage where the pump is submerged. Use CAP for large-volume surface drainage, flood control, or sites without grid power. Use CSP for light drainage of corrosive or contaminated water above the sump.

Get a Quote  WhatsApp Us

Applications

Construction site drainage

Foundation excavations, basement pits, and trench systems accumulate ground infiltration and rainwater continuously during construction. CDW submersibles (3–50 HP) handle the standard sump drainage cycle placed at the lowest point of the excavation with a 15 m PVC cable, reachable from surface. For deeper tunnels and highway underpasses, CDW High Head (5–75 HP, head to 140 M) moves water to surface in a single stage. For large open excavations or sites without power, CAP diesel units (60+ HP) drain high volumes without priming.

Municipal and urban drainage

Municipal stormwater drainage during monsoon season requires high-flow pumps that can be deployed rapidly at multiple points. CAP auto-prime units on small trolleys arrive on-site, connect to suction and delivery lines, and begin pumping within minutes. Cosmos operates a rental fleet of 50+ CAP units for municipal flood control, deploying 80+ pumps per year for urban drainage. CosmoSmart IoT monitoring (available on all CAP units) tracks pump location, fuel consumption, and running data in real time across the deployed fleet.

Industrial and mining drainage

Mine sump drainage requires continuous-duty pumps tolerant of abrasive suspended solids. CDW Ultra High Head (50–120 HP) handles mine drainage at heads up to 200 M, with Class H insulation (180°C) and dual SiC mechanical seals for 24-hour continuous operation. For ETP/STP drainage involving fine solids, the CSP self-priming surface pump handles corrosive effluents without submerging the motor.

Flood control

Large-scale flood control combines high-flow CAP units on heavy trolleys with CosmoSmart real-time monitoring. CAP open-impeller models handle up to 75 mm suspended solids in debris-laden floodwater without clogging. Cosmos has completed 250+ EPEC flood control and dewatering projects since 2013.

CDW drainage pump specifications

ModelShut-off headFlow rateHP rangeSolids (max)Applications
CDW Standard15.5–86.5 M450–8,500 LPM1.5–50 HP12 mmConstruction, basement, infrastructure
CDW High Head40–140 M350–2,200 LPM5–75 HP12 mmTunnels, deep pits, hydro civil
CDW Ultra High Head90–200 M50–200 m³/h50–120 HP12 mmMines, hydro power plants, major civil

About Cosmos Pumps

Cosmos Pumps Pvt. Ltd. manufactures the CDW, CAP, and CSP drainage pump range from a 95,000 sq. ft. vertical lean manufacturing facility in Faridabad, Haryana. The company holds 6 international certifications: ISO 9001:2015, CE Marking, ZED Gold, NSIC, UL Compliance, and EAC (Eurasian Conformity). Cosmos has served 2,500+ customers across 5,000+ completed projects and installations in 20+ countries since 2013.

Frequently asked questions

What is a drainage pump?

A drainage pump removes water from a flooded, waterlogged, or continuously inundated area and discharges it at a distance or elevation. Types include submersible electric models (pit and sump drainage), diesel engine auto-prime surface models (flood control and open-excavation drainage), and self-priming surface models (light drainage of contaminated or corrosive water).

Which drainage pump is best for construction sites?

CDW submersible (1.5–50 HP) is the standard for construction site sump drainage — it operates fully submerged, handles dirty water with solids up to 12 mm, and requires no suction line. For foundation pits exceeding 87 M total head, specify CDW High Head (5–75 HP). For large open excavations or sites without grid power, a CAP auto-prime diesel pump handles high flow without priming.

What drainage pump is used for municipal flood control?

Municipal flood control drainage uses CAP auto-prime surface pumps (60–1,550+ HP) with diesel or electric engines. These units run without priming, handle up to 75 mm solids in floodwater, achieve flow rates up to 74,483 LPM, and can be trailer-mounted for rapid deployment across multiple drain points.

What flow rate do I need for drainage?

Construction sump drainage typically requires 500–3,000 LPM; tunnel drainage may require 2,000–8,000+ LPM depending on tunnel depth and groundwater conditions; municipal flood control drainage typically uses 20,000–74,000 LPM across multiple large pumps. The correct calculation starts with maximum inflow rate and target drainage time. Cosmos’s engineering team provides pump sizing for specific drainage requirements on request.

What is the difference between a drainage pump and a dewatering pump?

A drainage pump removes surface water or accumulated water from an area (construction sump, flooded street, basement). A dewatering pump extracts groundwater during civil construction to lower the water table around a foundation or excavation. The CDW submersible and CAP auto-prime series handle both applications — the distinction is water source (surface accumulation vs groundwater), not pump type.

Get a Quote  WhatsApp Us

Frequently Asked Questions

  • What is a drainage pump and how does it work?

    It removes unwanted water from a site. It pushes or pulls water through pipes to keep areas dry.

    For detailed product specifications, flow ratings, and application guidance, see our drainage pump range page.

  • What is the difference between a drainage pump and a dewatering pump?

    A drainage pump handles surface water. A dewatering pump is often used for deeper groundwater.

  • Where are drainage pumps commonly used?

    They are used in construction, mining, cities, and factories. They work wherever water needs to be removed.

  • How do I choose the right drainage pump for my project?

    Check water volume, depth, and site needs. Our team can guide you to the best option.

  • Do you offer both electric and diesel-driven drainage pumps?

    Yes, we supply both electric and diesel options. You can choose based on your site.

  • Are your drainage pumps suitable for international use?

    Yes, they are built to meet global standards. They work well in any country.

  • Can your pumps handle dirty or muddy water?

    Yes, they can handle solids and muddy water. They are strong and reliable.

  • What is the lifespan of your drainage pumps?

    Our pumps last for many years. With care, they can serve even longer.

  • Do you provide after-sales support and spare parts?

    Yes, we give full support with spares. Our service team is always available.

  • How can I get a quote or technical brochure?

    You can contact us directly for a quote. We also provide brochures on request.

  • What is a drainage pump used for in India?

    Drainage pumps in India are used for removing water from construction sites, industrial areas, and residential basements.

  • What types of drainage pumps are available in India?

    Cosmos Pumps offers drainage vacuum pumps, drainage suction pumps, and general drainage pumps for various applications.

  • How can I buy a drainage pump in India?

    You can contact suppliers to get guidance and request quotes for pumps suitable for your project needs.

  • Where are drainage pumps used in Qatar?

    In Qatar, drainage pumps are used for construction site dewatering, industrial water management, and flood control.

  • Why are drainage pumps important in Saudi Arabia?

    Drainage pumps help remove excess water efficiently, ensuring smooth operation in construction, industrial, and municipal projects.

  • What types of drainage pumps are available in the UAE?

    In the UAE, both submersible and centrifugal drainage pumps are used for construction, industrial, and commercial water management.

  • Who supplies reliable drainage pumps in the Middle East?

    Cosmos Pumps is a trusted supplier in Qatar, Saudi Arabia, and the UAE, providing durable and efficient drainage pumps for all applications.